Complete lines for packing light and hard free-flowing dusty products into bags, big bags and other ready-made containers

For packing loose and dusty products into bags and other containers, it is not enough just to purchase a filling machine. Depending on the task, before packaging, the product must be loaded into the receiving hopper, big-bag unloader or infeed conveyor output tray. The product can be fed into the receiving device manually or by a conveyor, it can be fed from a larger container, for example, if you need to repack the product from a big bag into a bag. burr or auger system can be used to feed product from the floor, lifting the product from the floor if it is unloaded from a dump truck. At the request of the client, other devices can be added to the line, for example, a sifter or separator for separating dust or separating the packaged product into fractions.

For accurate and uninterrupted operation of the dispenser, it is necessary that it works in stationary conditions. This goal is usually achieved with a small over-dosing hopper compared to the receiving hopper, which maintains a constant level. A feeding conveyor is provided between the receiving and dosing hoppers. A level sensor is located in the upper part of the hopper, and when the level in the over-dosing hopper starts to fall as a result of packing, this conveyor turns on, tops up the product and the level is thus maintained constant. Depending on the material to be packed, the dose size and the desired productivity, the following types of dispensers are used: belt, auger, sliding and other types of dispensers.

Depending on the material of the bags, after dispensing they are sent to sealing or sewing up.

Lines are completed, as a rule, with group packaging. For bags, this is more likely to be shrink wrapped or in a plastic bag. Packages can be stacked manually or using a packing machine. For bags - stacking on pallets and wrapping with stretch film.

According to the degree of automation of the process, the lines can be divided into semi-automatic and automatic.Our company manufactures semi-automatic lines, using the elements listed above, produced by us or our Ukrainian partners. The difference between them and automatic ones is that the process of selecting a bag from the storage and hanging it on the drawer, sewing, palletizing and banding is carried out on them with the participation of a person.

Receiving hopper.
Serves for accumulation of the packaged product, eliminates the need for constant distraction of workers from loading the product into the line.

Big-bag unloader.
The big-bag is inserted into the unloader and the product from it is consumed gradually as it is packed into bags. Its use makes it possible to do without a large receiving hopper into which these big-bags need to be unloaded before packaging.

Burr.
Used to feed material from the floor if it is in bulk.

Auger system.
Serves to lift material that is unloaded from a dump truck.

Belt weighing machine.
In this type of dispenser, the belt conveyor is used as a dosing element.

Auger weigher.
Used for packaging of difficult-to-flow, dusty products.

Sliding weigher.
Typically used for hanging under large hopper.

Overhead sealer.
It is installed above the conveyor along which the filled but not yet sealed bags move. Bags stop in the sealer area, close and move on to storage.

Stationary bag sewing machine.
With its help, bags made of non-solderable material are sewn up.

Shrink Machine.
Designed for packing packages and bags in shrink film.

Enterprises under TM "Omela" offer semi-automatic lines of their own production.

The following are the different options for semi-automatic lines.

A complete line for packing hard-to-flow, dusty products into bags and big-bags.

Line for repacking granulated feed into big-bag bags with unloader.

Packing line for hard-to-flow, dusty products in open bags.

Such lines can also pack well-flowing products in the range from 1 to 2000 kg and reach a capacity of up to 30 t/h.

Other line modifications are also possible.